How To Frost Bathroom Glass Window

• How To'southward & Quick Tips

3 Easy Ways You lot Can Add Privacy to Glass

Itching for a home update? Here'southward an easy one: Frost window or drinking glass door for a luxe look and more privacy. In that location's more than one way to go about information technology, then choose your favorite approach.

Photo: shutterstock.com

More than a mere decorative terminate, frosted glass also offers a practical do good: Without blocking the passage of light, it adds privacy to windows or doors that would otherwise exist transparent. While professionals frost glass through sandblasting, a exercise-it-yourself can attain the same effect with one of 3 bones methods.

Photo: nyshower.com

SPRAY Paint

Believe it or not, you can frost drinking glass with a special type of spray pigment. Rust-Oleum manufacturers a popular, readily bachelor product forth these lines, which you tin purchase on Amazon or pick upwards at your local habitation comeback retail centre.

Applying the finish is easy. Here's how information technology's done:

1. Clean the glass throughly and tape off the window or door frame.
2. Use a thin coat of the spray paint and let it dry.
3. Apply boosted coats, if y'all wish for cracking opacity.

If y'all get tired of the look, it's no problem: The finish tin can be removed with a glass scraper. Being that the spray pigment comes at a low cost, information technology'southward worth a shot if you want to frost glass in your dwelling house.

WINDOW FILM

You tin can also frost glass past ways of window pic, which is non-adhesive and works via static cling. That means it's forgiving: If you don't become the application precisely right on the beginning effort, you tin can start over pretty easily.

1. Kickoff, thoroughly wash the surface to be frosted, using drinking glass cleaner and a lint-costless cloth.
2. Next, combine water with a couple drops of dish detergent in a spray bottle.
3. And then proceed to lightly spritz the glass before applying the window film.
4. As yous get, remove air bubbles with a squeegee.

ETCHING

A permanently frosted event may be accomplished through the utilise of a glass-etching foam. Though you lot've probably never heard of such products, crafters love them. Armour Etch glass etching cream leads the pack in popularity (view on Amazon).

If you choose to go this route, take care in applying the cream and closely follow the instructions printed on the package. Basically, the process involves the post-obit:

1. Mask off sensitive areas with painter'south tape.
2. Utilise a bristled brush to scrub the cream onto the drinking glass.
3. Allow the etching cream sit down for a menstruum of time stipulated past the manufacturer.
4. Rinse off the cream with warm water.

Suddenly—and somewhat magically—there will exist etched glass where there was formerly a traditional clear pane.

Source: https://www.bobvila.com/articles/how-to-frost-glass/

Posted by: duplantislifehout.blogspot.com

Share this post